* feat(onboarding): persist app recommendations once
* feat(onboarding): add self-naming birth sequence
* chore(wizard): hoist bootstrap-defer imports to the top of the module
* docs(bootstrap): persist agreed identity into IDENTITY.md and SOUL.md as well
* docs: regenerate docs map after onboarding plan merge
* fix(wizard): reuse a pending stored offer instead of rescanning apps
* fix(onboard): deduplicate bootstrap recommendations
* feat(onboard): add browser-first guided handoff
* chore: drop release-only CHANGELOG edit from browser-handoff branch
* fix(onboard): make browser handoff reach the gateway on real installs
The presence probe connected as a raw shared-auth client with a possibly
SecretRef-managed token, which the gateway rejects as an unpaired Control UI
client ("device identity required"), so the handoff never fired and always
fell through to the terminal hatch. Read presence as a CLI-mode loopback client
(the trusted path every openclaw command uses) so operator.read is granted, and
share that one auth path between the reachability gate and the wait loop. Also
short-circuit when gateway.controlUi.enabled is false so onboarding does not open
a dead dashboard URL and block for the full timeout.
* fix(onboard): share resolved target between handoff gate and wait
The reachability preflight now resolves the same target (and shared secret) the
wait loop uses, and presents the configured secret to the CLI-mode presence
read. Known remaining limitation: on fresh quickstart gateways whose auth token
is written to config but resolved differently at runtime, the presence read is
rejected with a token mismatch and the handoff falls back to the terminal hatch.
Tracked for follow-up before enabling the browser handoff by default.
* docs(onboarding): mark phase 3 browser handoff as held with diagnosis
* docs(onboarding): phase 3 proven end-to-end; token-mismatch hold was a test artifact
* fix(onboard): satisfy docs-map and test-type gates for the handoff branch
* refactor(onboard): split guided manual stage
* feat(onboarding): recommend plugins and skills from installed apps
Scan installed macOS apps during classic onboarding (TCC-free), gather
candidates from official catalogs + ClawHub search, let the configured
model pick genuine matches, and offer an opt-in multiselect install step.
Adds a device.apps node-host command (default-off sharing, Android-parity
envelope) so remote gateways can request a paired Mac's inventory, and a
wizard.appRecommendations kill switch. Custom setup-inference completions
no longer inherit the 32-token verification-probe output cap.
* feat(onboarding): recommend apps in guided flow
* fix(onboarding): harden app recommendations against ClawHub self-promotion
Third-party ClawHub skills are never pre-selected regardless of model tier
(publisher-controlled listing text reaches the matcher prompt and could
promote itself); their labels now say they install third-party code.
Installed-app scans follow symlinked .app bundles. Matcher output stays
bounded by the resolved model's own maxTokens budget (documented invariant).
* fix(onboarding): key official catalog candidates by resolved plugin id
Real catalog entries are package manifests without a top-level id; keying the
candidate map and channel/provider classification by entry.id collapsed the
whole official catalog into one undefined-keyed entry, so no official plugin
or channel was ever recommended. Regression test runs against the bundled
catalogs.
* fix(onboarding): satisfy lint, types, deadcode, and migration gates
Split the guided-onboarding test into a self-contained custodian suite to stay
under max-lines. Narrow app-recommendation exports (drop dead node-payload
normalizer, unexport internal types/helpers, route candidate tests through the
public API), replace map-spread with a helper, unexport device.apps result
types, add installedAppsSharing to node-host migration expectations, cast the
wizard multiselect mock, and regenerate the docs map.
* test(onboarding): register new live test in the shard classifier
* feat(onboard): guided onboarding becomes the custodian flow
Question zero asks for discovery consent up front (full access recommended,
guarded asks once or configures manually; persisted as wizard.accessMode and
honored on reruns). Discovery quietly collects auto-ladder failures into one
summary with details behind 'See other options', quips about detected coding
agents, and announces the working route as a default with an easy undo.
After inference and the memory offer (skipped when discovery was declined),
fresh installs auto-apply the standard setup plan and hatch the agent
directly in the terminal; configured installs (pre-existing model or gateway
config) stay verification-only and never reinstall or restart the Gateway
service. Setup-apply failures fall back to the conversational chat.
Remote-gateway onboarding keeps its legacy chat handoff explicitly.
listManualSetupInferenceOptions lists manual providers without scanning.
* docs(onboarding): add custodian redesign implementation plan (living doc)
* docs: regenerate docs map for onboarding-redesign page
* feat(migrate): add Hermes memory-only import and a shared memory-import core
* feat(onboarding): offer detected memory imports during CLI setup and guided onboarding
* feat(ui): show a first-run memory-import offer in Control UI onboarding mode
* feat(linux-app): open the first-run dashboard in onboarding mode
* feat(macos): add the onboarding memory-import page
* docs: document the onboarding memory-import page across surfaces
* chore(i18n): translate onboarding memory-import strings for control-ui and native locales
* refactor: keep memory-import internals unexported for deadcode gates
* fix(ci): resolve lint findings in onboarding memory import
* chore(i18n): refresh native inventory after lint refactor
* fix(ci): skip updater artifacts in the unsigned Linux companion PR lane
* chore(i18n): reconcile locale artifacts after rebase
User-facing name is now OpenClaw (the system speaks); internal code name is
system-agent. Gateway methods crestodian.* -> openclaw.chat/openclaw.setup.*,
agent tool -> openclaw, reserved agent ids openclaw + retired crestodian.
openclaw setup routes: onboarding flags -> onboard, -m/--yes -> system agent,
bare configured interactive -> OpenClaw chat, unconfigured -> onboarding.
Hidden crestodian CLI and /crestodian TUI aliases kept; docs moved to
docs/cli/openclaw.md with redirect stub. macOS/Android strings in lockstep.
Refs #107237
Restore the grouped provider/auth picker for fresh guided onboarding, keep secondary providers under More, expose OAuth and device-code methods, and bound the setup probe session identifier so ChatGPT login is not rejected by the prompt cache key limit.
* feat(onboard): guided CLI onboarding with live AI verification and classic fallback
Interactive `openclaw onboard` (and bare `openclaw` on a fresh install) now
runs a guided flow with macOS-app parity: detect existing AI access, live-test
candidates with a real completion before persisting anything, walk down the
ladder on failure with mapped reasons, and offer verified manual API-key entry
from installed provider manifests (masked input). In-flow escapes: classic
wizard, Crestodian chat, skip-AI. Classic wizard gains an optional post-auth
live verification step. `--classic`, `--modern`, and `--non-interactive`
contracts unchanged. Docs corrected for post-#99935 routing.
Closes#101851
* improve(onboard): quiet probe diagnostics in wizard TTY, carry risk ack into classic escape
Candidate live-tests during guided setup are probes: rename their run id and
lane to the existing probe conventions (logging/subsystem.ts console
suppression, command-queue quiet probe lanes) so expected failures stop
leaking raw diagnostics into the Clack UI; file diagnostics unchanged. The
classic-wizard escape now passes the already-collected risk acknowledgement
through instead of re-prompting in the same session.
* fix(onboard): quiet the session-derived setup-inference probe lane too
The live-test run enqueues on two lanes: the explicit probe lane and one
derived from its temp session key. Extend the shared quiet-probe predicate to
cover the derived lane so a failing candidate cannot leak lane-task
diagnostics into the wizard TTY.
* improve(onboard): suppress subsystem console output during wizard live tests
Provider-transport subsystem loggers (model-fetch start/response, transport
errors) carry no run id, so probe suppression cannot catch them and a failing
candidate printed raw log lines into the Clack TTY. Reuse the TUI console
subsystem-filter seam via a finally-safe scoped helper around guided
activation and the classic live-verify; file logging is unchanged and the
gateway (macOS app) surface is unaffected.
* fix(onboard): never auto-replace a configured model when its live check fails
The re-run verification probe executes outside the configured workspace (setup
never runs workspace plugins), so a workspace-backed current model can fail
the check while working fine in the agent. Stop the auto ladder on an
existing-model failure and hand the decision to the manual stage instead of
silently persisting a different candidate as the default. Docs note the
fail-safe and the workspace caveat.
* feat(onboard): two-way switching between Crestodian chat and the menu wizards
From the chat, `open setup wizard`, `open classic wizard`, and `open channel
wizard for <channel>` hand off to the guided flow, the classic wizard, or the
masked `channels add` wizard after the chat TUI tears down (mirrors the
open-tui handoff; gateway surface gets a text pointer instead). The hosted
channel wizard no longer dead-ends at sensitive steps — it offers the switch
and remembers the channel. New read-only `channel info <channel>` operation
and ring-zero action surface label, blurb, configured state, and the real
docs URL from channel-setup discovery so the assistant can explain Slack or
Telegram prerequisites instead of guessing; both prompts instruct it to use
them. `channels add --channel <id>` now preselects the channel. Docs cover
the interchangeable flows.
* fix(onboard): avoid param reassignment in open-setup handoff
* improve(onboard): separate ask-about vs connect intent in channel prompt guidance
Live test showed the agent detouring an explicit connect request through
channel_info because the guidance said to consult it first. Both prompts now
distinguish asking about a channel (channel info + docs link) from asking to
connect (connect right away).
* fix(channels): mark channel token entry as sensitive input
The shared single-token prompt lacked sensitive:true, so terminal wizards
echoed pasted channel tokens and the Crestodian chat bridge (which refuses
plain-text secrets based on this flag) hosted the Telegram token step in
visible chat. Found live-testing the chat-to-wizard switch; pre-existing on
main but load-bearing for the masked-wizard contract this PR documents.
* fix(onboard): restore terminal state around the guided flow's TUI launch
Mirror the classic finalize handoff so the chat TUI never inherits the wizard
prompter's raw/paused terminal state on the default first-run path.
* fix(channels): type the token prompter mock for the sensitive-flag assertion
* fix(gateway): map the TUI-only open-setup action to none for app clients
Engine-side surface gating already prevents open-setup replies on the gateway
surface; this keeps the client-visible action enum stable even if that gate
ever regresses. (Reviewed with the switching round; missed in its commit.)
* docs: regenerate docs map for onboarding page changes
Bare openclaw does not open Crestodian once config has authored settings.
Document the actual three-way routing: missing/unauthored config starts
classic onboarding, invalid config starts Crestodian for repair, valid
config opens the normal agent TUI (local or reachable configured Gateway),
with /crestodian or openclaw crestodian as the explicit entry points.
Matches resolveBareRootLaunchTarget in src/cli/run-main.ts.
Fix live model inference edge cases across provider streaming, model switching, outbound delivery, and gateway tool resolution.
Includes live/provider issue fixes and leaves #89100 explicitly partial for the remaining FM-2 group routing case.
Summary:
- This PR routes bare `openclaw` to classic onboarding for missing, empty, or metadata-only configs; keeps aut ... cs/changelog/tests; and narrows a Docker E2E boundary-check exception for an existing source-checkout lane.
- Reproducibility: not applicable. this is a feature/default-routing PR rather than a bug report. The branch p ... ill includes a fresh-state terminal run reaching `OpenClaw setup` and tests for the relevant config states.
Automerge notes:
- PR branch already contained follow-up commit before automerge: feat: start onboarding for fresh CLI installs
Validation:
- ClawSweeper review passed for head f4b2572f2e.
- Required merge gates passed before the squash merge.
Prepared head SHA: f4b2572f2e
Review: https://github.com/openclaw/openclaw/pull/85519#issuecomment-4522938004
Co-authored-by: FullerStackDev <263060202+fuller-stack-dev@users.noreply.github.com>
Co-authored-by: clawsweeper <274271284+clawsweeper[bot]@users.noreply.github.com>
Co-authored-by: clawsweeper[bot] <274271284+clawsweeper[bot]@users.noreply.github.com>
Approved-by: takhoffman
Co-authored-by: takhoffman <781889+takhoffman@users.noreply.github.com>
Simplify plugin installation and runtime loading around package-manager-owned dependencies, with Jiti reserved for local/TS fallback paths.
Also scans npm plugin install roots so hoisted transitive dependencies are covered by dependency denylist and node_modules symlink checks.
* Feat: LM Studio Integration
* Format
* Support usage in streaming true
Fix token count
* Add custom window check
* Drop max tokens fallback
* tweak docs
Update generated
* Avoid error if stale header does not resolve
* Fix test
* Fix test
* Fix rebase issues
Trim code
* Fix tests
Drop keyless
Fixes
* Fix linter issues in tests
* Update generated artifacts
* Do not have fatal header resoltuion for discovery
* Do the same for API key as well
* fix: honor lmstudio preload runtime auth
* fix: clear stale lmstudio header auth
* fix: lazy-load lmstudio runtime facade
* fix: preserve lmstudio shared synthetic auth
* fix: clear stale lmstudio header auth in discovery
* fix: prefer lmstudio header auth for discovery
* fix: honor lmstudio header auth in warmup paths
* fix: clear stale lmstudio profile auth
* fix: ignore lmstudio env auth on header migration
* fix: use local lmstudio setup seam
* fix: resolve lmstudio rebase fallout
---------
Co-authored-by: Frank Yang <frank.ekn@gmail.com>
