--- summary: "Nodes: pairing, capabilities, permissions, and CLI helpers for canvas/camera/screen/device/notifications/system" read_when: - Pairing iOS/watchOS/Android nodes to a gateway - Using node canvas/camera for agent context - Adding new node commands or CLI helpers title: "Nodes" --- A **node** is a companion device (macOS/iOS/watchOS/Android/headless) that connects to the Gateway with `role: "node"` and exposes a command surface (e.g. `canvas.*`, `camera.*`, `device.*`, `notifications.*`, `system.*`) via `node.invoke`. Most nodes use the Gateway WebSocket on the operator port. The optional direct Apple Watch node uses signed HTTPS polling on that same port because watchOS blocks generic low-level networking for ordinary apps. Protocol details: [Gateway protocol](/gateway/protocol). Legacy transport: [Bridge protocol](/gateway/bridge-protocol) (TCP JSONL; historical only for current nodes). macOS can also run in **node mode**: the menubar app connects to the Gateway's WS server and exposes its local canvas/camera commands as a node (so `openclaw nodes …` works against this Mac). In remote gateway mode, browser automation is handled by the CLI node host (`openclaw node run` or the installed node service), not by the native app node. Nodes are **peripherals**, not gateways: they don't run the gateway service, and channel messages (Telegram, WhatsApp, etc.) land on the gateway, not on nodes. Troubleshooting runbook: [/nodes/troubleshooting](/nodes/troubleshooting) ## Pairing + status Nodes use **device pairing**. A node presents a signed device identity during connect; the Gateway creates a device pairing request for `role: node`. Approve via the devices CLI (or UI). The direct Apple Watch setup uses an admin-minted, short-lived node-only setup code to approve its fixed low-risk command surface; later capability expansion still requires normal approval. ```bash openclaw devices list openclaw devices approve openclaw devices reject openclaw nodes status openclaw nodes describe --node ``` Pending pairing requests expire 5 minutes after the device's last retry — a device that keeps reconnecting keeps its one pending request (and `requestId`) alive instead of minting a new prompt every few minutes; see [Node pairing](/gateway/pairing) for the full request/approve lifecycle. If a node retries with changed auth details (role/scopes/public key), the prior pending request is superseded and a new `requestId` is created — clients get a `device.pair.resolved` event for the superseded request, and you should re-run `openclaw devices list` before approving. - `nodes status` marks a node as **paired** when its device pairing role includes `node`. - A connected native Mac with Accessibility permission can report coalesced physical-input activity. The Gateway marks the freshest eligible Mac as `active`, gives the agent a stable node-id hint, and routes node connection alerts there before a delayed fallback. See [Active computer presence](/nodes/presence) for setup, privacy, timing, and troubleshooting. - The device pairing record is the durable approved-role contract. Token rotation stays inside that contract; it cannot upgrade a paired node into a role that pairing approval never granted. - `node.pair.*` (CLI: `openclaw nodes pending/approve/reject/remove/rename`) is a separate, gateway-owned node pairing store that tracks the node's approved command/capability surface across reconnects. It does **not** gate transport authentication — device pairing does that. - `openclaw nodes remove --node ` removes a node pairing. For a device-backed node it revokes the device's `node` role in the paired-device store and disconnects that device's node-role sessions: a mixed-role device keeps its row and only loses the `node` role, while a node-only device row is deleted. It also clears any matching entry from the separate node pairing store. `operator.pairing` may remove non-operator node rows on other devices; a device-token caller revoking its own node role on a mixed-role device additionally needs `operator.admin`. - Approval scope follows the pending request's declared commands: - commandless request: `operator.pairing` - non-exec node commands: `operator.pairing` + `operator.write` - `system.run` / `system.run.prepare` / `system.which`: `operator.pairing` + `operator.admin` ## Version skew and upgrade order The Gateway WebSocket accepts authenticated node clients across an N-1 protocol window. The current v4 Gateway therefore accepts v3 nodes when the connection declares both `role: "node"` and `client.mode: "node"`. Operator and UI sessions must still use the current protocol. For staged fleet upgrades, upgrade the Gateway first, then upgrade each node. An N-1 node remains visible and manageable while it is upgraded; the Gateway logs `legacy node protocol accepted` with an upgrade recommendation. Pairing, device authentication, command allowlists, and exec approvals still apply. Plugin-owned capabilities and commands stay hidden until the node upgrades to the current protocol. Nodes older than N-1 require an out-of-band upgrade before reconnecting. The direct watchOS HTTPS transport requires the current protocol version; update the watch app with the Gateway before enabling direct mode. ## Remote node host (system.run) Use a **node host** when your Gateway runs on one machine and you want commands to execute on another. The model still talks to the **gateway**; the gateway forwards `exec` calls to the **node host** when `host=node` is selected. | Role | Responsibility | | ------------ | ---------------------------------------------------------------- | | Gateway host | Receives messages, runs the model, routes tool calls. | | Node host | Executes `system.run`/`system.which` on the node machine. | | Approvals | Enforced on the node host via `~/.openclaw/exec-approvals.json`. | Approval note: - Approval-backed node runs bind exact request context. The exec path prepares a canonical `systemRunPlan` before approval; once granted, the gateway forwards that stored plan, not any later caller-edited command/cwd/session fields, and re-validates the working directory before running. - For direct shell/runtime file executions, OpenClaw also best-effort binds one concrete local file operand and denies the run if that file changes before execution. - If OpenClaw cannot identify exactly one concrete local file for an interpreter/runtime command, approval-backed execution is denied instead of pretending full runtime coverage. Use sandboxing, separate hosts, or an explicit trusted allowlist/full workflow for broader interpreter semantics. ### Start a node host (foreground) On the node machine: ```bash openclaw node run --host --port 18789 --display-name "Build Node" ``` `node run` also accepts `--context-path` (Gateway WS context path), `--tls`, `--tls-fingerprint `, and `--node-id` (override the legacy client instance ID; this does not reset pairing). ### Remote gateway via SSH tunnel (loopback bind) If the Gateway binds to loopback (`gateway.bind=loopback`, default in local mode), remote node hosts cannot connect directly. Create an SSH tunnel and point the node host at the local end of the tunnel. Example (node host -> gateway host): ```bash # Terminal A (keep running): forward local 18790 -> gateway 127.0.0.1:18789 ssh -N -L 18790:127.0.0.1:18789 user@gateway-host # Terminal B: export the gateway token and connect through the tunnel export OPENCLAW_GATEWAY_TOKEN="" openclaw node run --host 127.0.0.1 --port 18790 --display-name "Build Node" ``` Notes: - `openclaw node run` supports token or password auth. - Env vars are preferred: `OPENCLAW_GATEWAY_TOKEN` / `OPENCLAW_GATEWAY_PASSWORD`. - Config fallback is `gateway.auth.token` / `gateway.auth.password`. - In local mode, node host intentionally ignores `gateway.remote.token` / `gateway.remote.password`. - In remote mode, `gateway.remote.token` / `gateway.remote.password` are eligible per remote precedence rules. - If active local `gateway.auth.*` SecretRefs are configured but unresolved, node-host auth fails closed. - Node-host auth resolution only honors `OPENCLAW_GATEWAY_*` env vars. ### Start a node host (service) ```bash openclaw node install --host --port 18789 --display-name "Build Node" openclaw node start openclaw node restart ``` `node install` also accepts `--context-path`, `--tls`, `--tls-fingerprint`, `--node-id` (legacy client instance ID only), `--runtime ` (default: node), and `--force` to reinstall. `node status`, `node stop`, and `node uninstall` are also available. ### Pair + name On the gateway host: ```bash openclaw devices list openclaw devices approve openclaw nodes status ``` If the node retries with changed auth details, re-run `openclaw devices list` and approve the current `requestId`. Naming options: - `--display-name` on `openclaw node run` / `openclaw node install` (persists in `~/.openclaw/node.json` on the node, alongside the client instance ID and Gateway connection metadata). - `openclaw nodes rename --node --name "Build Node"` (gateway override). ### Node-hosted MCP servers Configure MCP servers in `openclaw.json` on the node machine, not on the Gateway: ```json5 { nodeHost: { mcp: { servers: { localDocs: { command: "npx", args: ["-y", "@modelcontextprotocol/server-filesystem", "/srv/docs"], toolFilter: { include: ["read_*", "search"], }, }, internalApi: { url: "https://mcp.internal.example/mcp", transport: "streamable-http", headers: { Authorization: "Bearer ${INTERNAL_MCP_TOKEN}", }, }, }, }, }, } ``` The headless node host starts these servers, lists their tools, and publishes the descriptors after connecting. Tool calls return to that node through `mcp.tools.call.v1`; the Gateway does not need matching MCP config or a JS plugin. OAuth MCP servers are not supported by this node-hosted v1 path. Current node hosts declare the built-in `mcp.tools.call.v1` command family during their initial pairing even when no MCP server is configured. A node paired on an older OpenClaw version may request a one-time command-surface upgrade after the node host is updated. Adding, removing, or filtering servers after that does not require re-pairing because the approved command family is unchanged. Restart `openclaw node run` or `openclaw node restart` to apply node MCP config changes; the node host does not watch this config. Gateway operators can ignore all agent-visible tools published by paired nodes, including node-hosted MCP tools, with `gateway.nodes.pluginTools.enabled: false`. Exact command denies such as `gateway.nodes.denyCommands: ["mcp.tools.call.v1"]` also block execution. ### Node-hosted skills Install skills under the node machine's active OpenClaw skills directory, `~/.openclaw/skills` by default. `OPENCLAW_HOME`, `OPENCLAW_STATE_DIR`, and `OPENCLAW_CONFIG_PATH` move that active profile. `OPENCLAW_STATE_DIR` takes precedence for skills; otherwise, `skills/` is beside the path printed by `openclaw config file`. The headless node host publishes valid `SKILL.md` files after it connects, and the Gateway adds them to agent skill snapshots only while that node remains connected. Each skill directory name must match the `name` frontmatter field so the abstract node locator maps to one entry without adding another protocol field. The initial node-role pairing approves skill publication. Adding, removing, or changing skills does not require another pairing or Gateway configuration change. Restart `openclaw node run` or `openclaw node restart` after changing node skill files; the node host does not watch the skills directory. Node-hosted skill entries identify their node and carry their execution location. Skill files, referenced relative paths, and binaries remain on that node. The agent reads the advertised `node://.../SKILL.md` location with the normal `read` tool. `file_fetch` accepts operator-approved absolute node paths, not node skill locators; runtimes without the normal read tool can instead run `cat SKILL.md` through `exec host=node node=` with the advertised `node://.../skills/` directory as `workdir`. Referenced files and binaries use the same exec target and workdir. The node host resolves that locator against its active OpenClaw state directory, so relative paths resolve on the node rather than the Gateway machine. The publishing node must have approved `system.run`, and the agent's exec policy must allow `host=node`; otherwise the skill stays out of that agent's snapshot. Set `nodeHost.skills.enabled: false` on the node to stop publication. Gateway operators can ignore skills from every paired node with `gateway.nodes.skills.enabled: false`. ### Headless identity state The headless node keeps three separate state files: - `~/.openclaw/node.json`: the legacy client instance ID (stored as `nodeId`), display name, and Gateway connection metadata. - `~/.openclaw/identity/device.json`: the signed device keypair and derived cryptographic device ID. - `~/.openclaw/identity/device-auth.json`: paired device auth tokens keyed by cryptographic device ID and role. For a signed node, the Gateway uses the cryptographic device ID for pairing and node routing. The client instance ID is only connection metadata. Changing `--node-id` or deleting only `node.json` therefore does not reset pairing. See [Identity and pairing state](/cli/node#identity-and-pairing-state) for the supported revoke-and-re-pair flow and upgrade notes. ### Allowlist the commands Exec approvals are **per node host**. Add allowlist entries from the gateway: ```bash openclaw approvals allowlist add --node "/usr/bin/uname" openclaw approvals allowlist add --node "/usr/bin/sw_vers" ``` Approvals live on the node host at `~/.openclaw/exec-approvals.json`. ### Point exec at the node Configure defaults (gateway config): ```bash openclaw config set tools.exec.host node openclaw config set tools.exec.security allowlist openclaw config set tools.exec.node "" ``` Or per session: ```text /exec host=node security=allowlist node= ``` Once set, any `exec` call with `host=node` runs on the node host (subject to the node allowlist/approvals). `host=auto` will not implicitly choose the node on its own, but an explicit per-call `host=node` request is allowed from `auto`. If you want node exec to be the default for the session, set `tools.exec.host=node` or `/exec host=node ...` explicitly. Related: - [Node host CLI](/cli/node) - [Exec tool](/tools/exec) - [Exec approvals](/tools/exec-approvals) ### Local model inference A desktop or server node can expose chat-capable models from an Ollama server running on that node. Agents use the Ollama plugin's `node_inference` tool to discover installed models and run a bounded prompt remotely; the Gateway does not need direct network access to Ollama. See [Ollama node-local inference](/providers/ollama#node-local-inference) for setup, model filtering, and direct verification commands. ### Codex sessions and transcripts The official `codex` plugin can expose non-archived Codex sessions on a headless node host or native macOS node. Catalog registration no longer depends on `supervision.enabled`; that option gates the agent-facing supervision tools. The plugin must still be active on both computers, and the node setting remains local consent: enabling only the Gateway cannot read another computer's Codex state. The node advertises the versioned read-only `codex.appServer.threads.list.v1` and `codex.appServer.thread.turns.list.v1` commands. Approve the node pairing upgrade when those commands first appear. The Gateway invokes them through the normal plugin node policy and isolates failures by host. Paired-node rows appear as a **Codex** group in the normal sessions sidebar. Selecting a row opens the normal Chat pane and reads its persisted transcript through bounded, cursor-paginated `thread/turns/list` calls with full item projection. The node invoke transport is request/response only and cannot carry the streaming turns, live events, or approvals required to continue a native thread through the Codex harness. **Continue** and **Archive** are therefore unavailable for remote rows. On the Gateway computer, stored and idle rows can start a distinct model-locked Chat branch. Either can be archived only after the operator confirms that no other Codex client is using it; a stored row's live activity remains unknown. Active rows cannot branch or archive. See [Supervise Codex sessions](/plugins/codex-supervision) for setup, pagination, local continuation, and the metadata security boundary. ### Claude sessions and transcripts The bundled `anthropic` plugin discovers non-archived Claude CLI and Claude Desktop sessions on the Gateway and paired nodes. Unlike Codex supervision, this needs no separate opt-in: a remote macOS app node advertises `anthropic.claude.sessions.list.v1` and `anthropic.claude.sessions.read.v1` when the Anthropic plugin is enabled and `~/.claude/projects/` exists. Approve the node pairing upgrade when those commands first appear. The catalog combines valid Claude CLI project-index records with a bounded metadata prefix from current `sdk-cli` JSONL files. Claude Desktop's local metadata supplies Desktop titles and archive state. Desktop metadata wins when both sources refer to the same Claude Code session ID; CLI-only transcripts remain visible because the CLI has no archive flag. Transcript reads use opaque byte-offset cursors and bounded backward file reads, so selecting a large session or loading an older page does not read the whole JSONL history into one Gateway response. Both node commands are read-only. They expose catalog metadata and transcript content only through the generic `sessions.catalog.list` and `sessions.catalog.read` methods to an authenticated operator connection with `operator.write`. Paired-node rows stay view-only. A Gateway-local Claude CLI row can be adopted from the normal Chat composer: OpenClaw imports bounded visible history, resumes with `--fork-session` on the first turn, and leaves the source transcript untouched. Claude Desktop rows remain view-only. See [Anthropic: Claude sessions across computers](/providers/anthropic#claude-sessions-across-computers) for the Control UI behavior and storage sources. ## Invoking commands Low-level (raw RPC): ```bash openclaw nodes invoke --node --command canvas.eval --params '{"javaScript":"location.href"}' ``` `nodes invoke` blocks `system.run` and `system.run.prepare`; those commands only run through the `exec` tool with `host=node` (see above). Higher-level helpers exist for the common "give the agent a MEDIA attachment" workflows (canvas, camera, screen, location, below). ## Command policy Node commands must pass two gates before they can be invoked: 1. The node must declare the command in its authenticated connect metadata (`connect.commands`). 2. The gateway's platform-and-approval-derived allowlist must include the declared command. Default allowlists by platform (before plugin defaults and `allowCommands`/`denyCommands` overrides): | Platform | Commands allowed by default | | -------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | iOS | `camera.list`, `location.get`, `device.info`, `device.status`, `contacts.search`, `calendar.events`, `reminders.list`, `photos.latest`, `motion.activity`, `motion.pedometer`, `system.notify` | | watchOS | `device.info`, `device.status`, `system.notify` | | Android | `camera.list`, `location.get`, `notifications.list`, `notifications.actions`, `system.notify`, `device.info`, `device.status`, `device.permissions`, `device.health`, `device.apps`, `contacts.search`, `calendar.events`, `callLog.search`, `reminders.list`, `photos.latest`, `motion.activity`, `motion.pedometer` | | macOS | `camera.list`, `location.get`, `device.info`, `device.status`, `contacts.search`, `calendar.events`, `reminders.list`, `photos.latest`, `motion.activity`, `motion.pedometer`, `system.notify` | | Windows | `camera.list`, `location.get`, `device.info`, `device.status`, `system.notify` | | Linux | `system.notify` (node host commands like `system.run` are approval-gated, see below) | These rows describe the Gateway policy ceiling, not the commands implemented by every node app. A command is usable only when the connected node also declares it. In particular, the current macOS app does not declare the device and personal-data families listed in the macOS policy row. `canvas.*` commands (`canvas.present`, `canvas.hide`, `canvas.navigate`, `canvas.eval`, `canvas.snapshot`, `canvas.a2ui.*`) are a plugin default on iOS, Android, macOS, Windows, and unknown platforms (not Linux); all of them are foreground-restricted on iOS. `talk.ptt.start`, `talk.ptt.stop`, `talk.ptt.cancel`, and `talk.ptt.once` are allowed by default for any node that advertises the `talk` capability or declares `talk.*` commands, independent of platform label. Desktop host commands (`system.run`, `system.run.prepare`, `system.which`, `browser.proxy`, `mcp.tools.call.v1`, and `screen.snapshot` on macOS/Windows) are not part of the static platform-default table above. They become available once the operator approves a pairing request that declares them, after which the node's approved command set carries them forward on reconnect. Dangerous or privacy-heavy commands still require explicit opt-in with `gateway.nodes.allowCommands`, even if a node declares them: `camera.snap`, `camera.clip`, `screen.record`, `computer.act`, `contacts.add`, `calendar.add`, `reminders.add`, `sms.send`, `sms.search`. `gateway.nodes.denyCommands` always wins over defaults and extra allowlist entries. See [Computer use](/nodes/computer-use) for the additional macOS, tool-policy, and arming gates around desktop input. Plugin-owned node commands can add a Gateway node-invoke policy. That policy runs after the allowlist check and before forwarding to the node, so raw `node.invoke`, CLI helpers, and dedicated agent tools share the same plugin permission boundary. Dangerous plugin node commands still require explicit `gateway.nodes.allowCommands` opt-in. After a node changes its declared command list, reject the old device pairing and approve the new request so the gateway stores the updated command snapshot. ## Config (`openclaw.json`) Node-related settings live under `gateway.nodes` and `tools.exec`: ```json5 { gateway: { nodes: { // Auto-approve first-time node pairing from trusted networks (CIDR list). // Disabled when unset. Only applies to first-time role:node requests // with no requested scopes; does not auto-approve upgrades. pairing: { autoApproveCidrs: ["192.168.1.0/24"], // SSH-verified auto-approval (default: enabled). Approves first-time // node pairing on an exact device-key match read back over SSH. sshVerify: true, }, // Trust agent-visible plugin tools published by paired nodes (default: true). pluginTools: { enabled: true, }, // Opt into dangerous/privacy-heavy node commands (camera.snap, etc.). allowCommands: ["camera.snap", "screen.record"], // Block exact command names even if defaults or allowCommands include them. denyCommands: ["camera.clip"], }, }, tools: { exec: { // Default exec host: "node" routes all exec calls to a paired node. host: "node", // Security mode for node exec: allow only approved/allowlisted commands. security: "allowlist", // Pin exec to a specific node (id or name). Omit to allow any node. node: "build-node", }, }, } ``` Use exact node command names. `denyCommands` removes a command even when a platform default or `allowCommands` entry would otherwise allow it. Paired nodes may publish agent-visible plugin tool descriptors by default, but each descriptor's command must still be in the node's approved command surface. Set `gateway.nodes.pluginTools.enabled: false` to ignore all such descriptors. See [Gateway configuration reference](/gateway/configuration-reference#gateway) for gateway node pairing and command-policy field details. Per-agent exec node override: ```json5 { agents: { list: [ { id: "main", tools: { exec: { node: "build-node" } }, }, ], }, } ``` ## Screenshots (canvas snapshots) If the node is showing the Canvas (WebView), `canvas.snapshot` returns `{ format, base64 }`. CLI helper (writes to a temp file and prints the saved path): ```bash openclaw nodes canvas snapshot --node --format png openclaw nodes canvas snapshot --node --format jpg --max-width 1200 --quality 0.9 ``` ### Canvas controls ```bash openclaw nodes canvas present --node --target https://example.com openclaw nodes canvas hide --node openclaw nodes canvas navigate https://example.com --node openclaw nodes canvas eval --node --js "document.title" ``` Notes: - `canvas present` accepts URLs or local file paths (`--target`), plus optional `--x/--y/--width/--height` for positioning. - `canvas eval` accepts inline JS (`--js`) or a positional arg. ### A2UI (Canvas) ```bash openclaw nodes canvas a2ui push --node --text "Hello" openclaw nodes canvas a2ui push --node --jsonl ./payload.jsonl openclaw nodes canvas a2ui reset --node ``` Notes: - Mobile nodes use a bundled app-owned A2UI page for action-capable rendering. - Only A2UI v0.8 JSONL is supported (v0.9/createSurface is rejected). - iOS and Android render remote Gateway Canvas pages, but A2UI button actions are dispatched only from the bundled app-owned A2UI page. Gateway-hosted HTTP/HTTPS A2UI pages are render-only on those mobile clients. ## Photos + videos (node camera) Photos (`jpg`): ```bash openclaw nodes camera list --node openclaw nodes camera snap --node # default: both facings (2 MEDIA lines) openclaw nodes camera snap --node --facing front openclaw nodes camera snap --node --device-id --max-width 1200 --quality 0.9 --delay-ms 2000 ``` Video clips (`mp4`): ```bash openclaw nodes camera clip --node --duration 10s openclaw nodes camera clip --node --duration 3000 --no-audio ``` Notes: - The node must be **foregrounded** for `canvas.*` and `camera.*` (background calls return `NODE_BACKGROUND_UNAVAILABLE`). - Nodes clamp clip duration to keep the base64 payload manageable (see [Camera capture](/nodes/camera) for exact per-platform limits). The `nodes` agent tool additionally caps requested `durationMs` at 300000 (5 minutes) before forwarding the call; the node itself enforces the tighter limit. - Android will prompt for `CAMERA`/`RECORD_AUDIO` permissions when possible; denied permissions fail with `*_PERMISSION_REQUIRED`. ## Screen recordings (nodes) Supported nodes expose `screen.record` (mp4). Example: ```bash openclaw nodes screen record --node --duration 10s --fps 10 openclaw nodes screen record --node --duration 10s --fps 10 --no-audio ``` Notes: - `screen.record` availability depends on node platform. - The `nodes` agent tool caps requested `durationMs` at 300000 (5 minutes); the node may enforce a tighter limit to bound the returned payload. - `--no-audio` disables microphone capture on supported platforms. - Use `--screen ` to select a display when multiple screens are available (0 = primary). ## Location (nodes) Nodes expose `location.get` when Location is enabled in settings. CLI helper: ```bash openclaw nodes location get --node openclaw nodes location get --node --accuracy precise --max-age 15000 --location-timeout 10000 ``` Notes: - Location is **off by default**. - "Always" requires system permission; background fetch is best-effort. - The response includes lat/lon, accuracy (meters), and timestamp. - Full parameter/response shape and error codes: [Location command](/nodes/location-command). ## SMS (Android nodes) Android nodes can expose `sms.send` and `sms.search` when the user grants **SMS** permission and the device supports telephony. Both commands are dangerous-by-default: the gateway operator must also add them to `gateway.nodes.allowCommands` before they can be invoked (see [Command policy](#command-policy)). For read-only SMS search, opt in explicitly in `openclaw.json`: ```json5 { gateway: { nodes: { allowCommands: ["sms.search"], }, }, } ``` Add `sms.send` separately only when the node should also be able to send messages. Android permission and Gateway command authorization are independent; granting the phone permission does not edit Gateway policy. Low-level invoke: ```bash openclaw nodes invoke --node --command sms.send --params '{"to":"+15555550123","message":"Hello from OpenClaw"}' ``` Notes: - `sms.search` may be declared before `READ_SMS` is granted so an invocation can return a permission diagnostic; reading messages still requires that Android permission. - Wi-Fi-only devices without telephony will not advertise `sms.send`. - A `requires explicit gateway.nodes.allowCommands opt-in` error means the phone declared the command but the Gateway operator has not authorized it. ## Device and personal data commands iOS and Android nodes advertise several read-only data commands by default (see the [Command policy](#command-policy) table); Android additionally exposes a larger family gated by its own in-app settings. Available families: - `device.status`, `device.info` — iOS, Android, Windows. - `device.permissions`, `device.health`, `device.apps` — Android only; `device.apps` requires Installed Apps sharing enabled in Android Settings and returns launcher-visible apps by default. - `notifications.list`, `notifications.actions` — Android only. - `photos.latest` — iOS, Android. - `contacts.search` — iOS, Android (read-only default); `contacts.add` is dangerous and needs `gateway.nodes.allowCommands`. - `calendar.events` — iOS, Android (read-only default); `calendar.add` is dangerous and needs `gateway.nodes.allowCommands`. - `reminders.list` — iOS, Android (read-only default); `reminders.add` is dangerous and needs `gateway.nodes.allowCommands`. - `callLog.search` — Android only. - `motion.activity`, `motion.pedometer` — iOS, Android; capability-gated by available sensors. Example invokes: ```bash openclaw nodes invoke --node --command device.status --params '{}' openclaw nodes invoke --node --command device.apps --params '{"limit":10}' openclaw nodes invoke --node --command notifications.list --params '{}' openclaw nodes invoke --node --command photos.latest --params '{"limit":1}' ``` ## System commands (node host / mac node) The macOS node exposes `system.run`, `system.which`, `system.notify`, and `system.execApprovals.get/set`. The headless node host exposes `system.run.prepare`, `system.run`, `system.which`, and `system.execApprovals.get/set`. Examples: ```bash openclaw nodes notify --node --title "Ping" --body "Gateway ready" openclaw nodes invoke --node --command system.which --params '{"bins":["git"]}' ``` Notes: - `system.run` returns stdout/stderr/exit code in the payload. - Shell execution now goes through the `exec` tool with `host=node`; `nodes` remains the direct-RPC surface for explicit node commands. - `nodes invoke` does not expose `system.run` or `system.run.prepare`; those stay on the exec path only. - The exec path prepares a canonical `systemRunPlan` before approval. Once an approval is granted, the gateway forwards that stored plan, not any later caller-edited command/cwd/session fields. - `system.notify` respects notification permission state on the macOS app; supports `--priority ` and `--delivery `. - Unrecognized node `platform` / `deviceFamily` metadata uses a conservative default allowlist that excludes `system.run` and `system.which`. If you intentionally need those commands for an unknown platform, add them explicitly via `gateway.nodes.allowCommands`. - `system.run` supports `--cwd`, `--env KEY=VAL`, `--command-timeout`, and `--needs-screen-recording`. - For shell wrappers (`bash|sh|zsh ... -c/-lc`), request-scoped `--env` values are reduced to an explicit allowlist (`TERM`, `LANG`, `LC_*`, `COLORTERM`, `NO_COLOR`, `FORCE_COLOR`). - For allow-always decisions in allowlist mode, known dispatch wrappers (`env`, `flock`, `nice`, `nohup`, `stdbuf`, `timeout`) persist inner executable paths instead of wrapper paths. If unwrapping is not safe, no allowlist entry is persisted automatically. - On Windows node hosts in allowlist mode, shell-wrapper runs via `cmd.exe /c` require approval (allowlist entry alone does not auto-allow the wrapper form). - Node hosts ignore `PATH` overrides in `--env` and strip a large, maintained set of interpreter/shell startup variables (for example `NODE_OPTIONS`, `PYTHONPATH`, `BASH_ENV`, `DYLD_*`, `LD_*`) before running a command. If you need extra PATH entries, configure the node host service environment (or install tools in standard locations) instead of passing `PATH` via `--env`. - On macOS node mode, `system.run` is gated by exec approvals in the macOS app (Settings → Exec approvals). Ask/allowlist/full behave the same as the headless node host; denied prompts return `SYSTEM_RUN_DENIED`. - On headless node host, `system.run` is gated by exec approvals (`~/.openclaw/exec-approvals.json`); on macOS specifically, see the exec-host routing env vars under [Headless node host](#headless-node-host-cross-platform) below. ## Exec node binding When multiple nodes are available, you can bind exec to a specific node. This sets the default node for `exec host=node` (and can be overridden per agent). Global default: ```bash openclaw config set tools.exec.node "node-id-or-name" ``` Per-agent override: ```bash openclaw config get agents.list openclaw config set 'agents.list[0].tools.exec.node' "node-id-or-name" ``` Unset to allow any node: ```bash openclaw config unset tools.exec.node openclaw config unset 'agents.list[0].tools.exec.node' ``` ## Permissions map Nodes may include a `permissions` map in `node.list` / `node.describe`, keyed by permission name (e.g. `screenRecording`, `accessibility`, `location`) with boolean values (`true` = granted). ## Headless node host (cross-platform) OpenClaw can run a **headless node host** (no UI) that connects to the Gateway WebSocket and exposes `system.run` / `system.which`. This is useful on Linux/Windows or for running a minimal node alongside a server. Start it: ```bash openclaw node run --host --port 18789 ``` Notes: - Pairing is still required (the Gateway will show a device pairing prompt). - Client instance metadata, signed device identity, and pairing auth use separate files; see [Headless identity state](#headless-identity-state). - Exec approvals are enforced locally via `~/.openclaw/exec-approvals.json` (see [Exec approvals](/tools/exec-approvals)). - On macOS, the headless node host executes `system.run` locally by default. Set `OPENCLAW_NODE_EXEC_HOST=app` to route `system.run` through the companion app exec host; add `OPENCLAW_NODE_EXEC_FALLBACK=0` to require the app host and fail closed if it is unavailable. - Add `--tls` / `--tls-fingerprint` when the Gateway WS uses TLS. ## Mac node mode - The macOS menubar app connects to the Gateway WS server as a node (so `openclaw nodes …` works against this Mac). - In remote mode, the app opens an SSH tunnel for the Gateway port and connects to `localhost`.