openclaw/docs/tools/browser-wsl2-windows-remote-cdp-troubleshooting.md

summary, read_when, title

summary	read_when	title
Troubleshoot WSL2 Gateway + Windows Chrome remote CDP in layers	Running OpenClaw Gateway in WSL2 while Chrome lives on Windows Seeing overlapping browser/control-ui errors across WSL2 and Windows Deciding between host-local Chrome MCP and raw remote CDP in split-host setups	WSL2 + Windows + remote Chrome CDP troubleshooting

In the common split-host setup, OpenClaw Gateway runs inside WSL2, Chrome runs on Windows, and browser control must cross the WSL2/Windows boundary. Several independent problems can surface at once (see issue #39369): CDP transport, Control UI origin security, and token/pairing can each fail on their own while producing similar-looking errors. Work through the layers below in order instead of guessing which one is broken.

Choose the right browser mode first

Option 1: raw remote CDP from WSL2 to Windows

Use a remote browser profile pointing from WSL2 to a Windows Chrome CDP endpoint. Choose this when the Gateway stays inside WSL2, Chrome runs on Windows, and browser control needs to cross the WSL2/Windows boundary.

Option 2: host-local Chrome MCP

Use the existing-session driver (user profile) only when the Gateway runs on the same host as Chrome, you want the local signed-in browser state, you do not need cross-host browser transport, and you do not need responsebody, PDF export, download interception, or batch actions (Chrome MCP profiles do not support these).

For WSL2 Gateway + Windows Chrome, use raw remote CDP. Chrome MCP is host-local, not a WSL2-to-Windows bridge.

Working architecture

• WSL2 runs the Gateway on 127.0.0.1:18789
• Windows opens the Control UI in a normal browser at http://127.0.0.1:18789/
• Windows Chrome exposes a CDP endpoint on port 9222
• WSL2 can reach that Windows CDP endpoint
• OpenClaw points a browser profile at the address reachable from WSL2

Critical rule for the Control UI

When the UI is opened from Windows, use Windows localhost unless you have a deliberate HTTPS setup:

http://127.0.0.1:18789/

Do not default to a LAN IP. Plain HTTP on a LAN or tailnet address can trigger insecure-origin/device-auth behavior unrelated to CDP itself. See Control UI.

Validate in layers

Work top to bottom; do not skip ahead. Fixing one layer can still leave a different error visible from a layer further down.

Layer 1: verify Chrome is serving CDP on Windows

chrome.exe --remote-debugging-port=9222 --user-data-dir="$env:LOCALAPPDATA\OpenClaw\ChromeCDP"

Chrome 136 and later ignore remote-debugging command-line switches for the default Chrome data directory. Use a separate, non-default data directory as shown above. See Chrome's remote-debugging security change. This does not make the normal signed-in Chrome profile remotely controllable.

From Windows, verify Chrome itself first:

curl.exe http://127.0.0.1:9222/json/version
curl.exe http://127.0.0.1:9222/json/list

If this fails, diagnose the Windows listeners below. OpenClaw is not the problem yet.

Diagnose IPv4 and IPv6 before changing portproxy

Chromium tries to bind remote debugging to 127.0.0.1 first and falls back to [::1] only if the IPv4 bind fails. A persistent v4tov4 rule listening on 127.0.0.1:9222 can occupy that endpoint before Chrome starts. Chrome then falls back to [::1]:9222, while the old rule forwards IPv4 traffic back to its own listener and returns an empty reply.

Check the actual listeners and proxy rules from Windows instead of inferring them from the Chrome version:

netstat -ano | findstr :9222
netsh interface portproxy show all
curl.exe http://127.0.0.1:9222/json/version
curl.exe http://[::1]:9222/json/version

Use tasklist /fi "PID eq <PID>" for each PID from netstat.

• If chrome.exe answers on 127.0.0.1, remove any portproxy rule that also listens on 127.0.0.1:9222. Forward only the WSL2-reachable Windows adapter address to 127.0.0.1.

• If chrome.exe answers only on [::1], point the WSL2-reachable listener at ::1 with v4tov6 instead of forwarding to an unused IPv4 address:

  netsh interface portproxy add v4tov6 listenaddress=WINDOWS_HOST_OR_IP listenport=9222 connectaddress=::1 connectport=9222
  

Bind the listener to the adapter address WSL2 needs. Do not expose the CDP port on 0.0.0.0, a LAN address, or a tailnet address: CDP grants control of the browser session.

Layer 2: verify WSL2 can reach that Windows endpoint

From WSL2, test the exact address you plan to use in cdpUrl:

curl http://WINDOWS_HOST_OR_IP:9222/json/version
curl http://WINDOWS_HOST_OR_IP:9222/json/list

Good result:

• /json/version returns JSON with Browser / Protocol-Version metadata
• /json/list returns JSON (an empty array is fine if no pages are open)

If this fails, Windows is not exposing the port to WSL2 yet, the address is wrong for the WSL2 side, or firewall/port-forwarding/proxying is missing. Fix that before touching OpenClaw config.

Layer 3: configure the correct browser profile

Point OpenClaw at the address reachable from WSL2:

{
  browser: {
    enabled: true,
    defaultProfile: "remote",
    profiles: {
      remote: {
        cdpUrl: "http://WINDOWS_HOST_OR_IP:9222",
        attachOnly: true,
        color: "#00AA00",
      },
    },
  },
}

Notes:

• use the WSL2-reachable address, not whatever only works on Windows
• keep attachOnly: true for externally managed browsers
• cdpUrl can be http://, https://, ws://, or wss://
• use HTTP(S) when you want OpenClaw to discover /json/version
• use WS(S) only when the browser provider gives you a direct DevTools socket URL
• test the same URL with curl before expecting OpenClaw to succeed

Layer 4: verify the Control UI layer separately

Open http://127.0.0.1:18789/ from Windows, then verify:

• the page origin matches what gateway.controlUi.allowedOrigins expects
• token auth or pairing is configured correctly
• you are not debugging a Control UI auth problem as if it were a browser problem

Helpful page: Control UI.

Layer 5: verify end-to-end browser control

From WSL2:

openclaw browser --browser-profile remote open https://example.com
openclaw browser --browser-profile remote tabs

Good result:

• the tab opens in Windows Chrome
• browser tabs returns the target
• later actions (snapshot, screenshot, navigate) work from the same profile

Common misleading errors

Message	Meaning
control-ui-insecure-auth	UI origin/secure-context problem, not a CDP transport problem
token_missing	auth configuration problem
pairing required	device approval problem
Remote CDP for profile "remote" is not reachable	WSL2 cannot reach the configured cdpUrl
empty CDP reply / other side closed through a portproxy	Windows listener mismatch or a self-loop; inspect both loopback families and netsh interface portproxy show all
Browser attachOnly is enabled and CDP websocket for profile "remote" is not reachable	the HTTP endpoint answered, but the DevTools WebSocket could not be opened
stale viewport / dark-mode / locale / offline overrides after a remote session	run openclaw browser --browser-profile remote stop to close the session and release the cached Playwright/CDP connection without restarting the Gateway or the external browser
timeout around remoteCdpTimeoutMs (default 1500ms)	usually still CDP reachability, or a slow/unreachable remote endpoint
Playwright page enumeration timed out after 3000ms	the remote CDP connected, but its persistent tab read stalled; the deadline is the larger of remoteCdpTimeoutMs and remoteCdpHandshakeTimeoutMs
No Chrome tabs found for profile="user"	local Chrome MCP profile selected where no host-local tabs are available

Fast triage checklist

1. Windows: which of 127.0.0.1 or [::1] answers on /json/version, and does that listener belong to chrome.exe?
2. WSL2: does curl http://WINDOWS_HOST_OR_IP:9222/json/version work?
3. OpenClaw config: does browser.profiles.<name>.cdpUrl use that exact WSL2-reachable address?
4. Control UI: are you opening http://127.0.0.1:18789/ instead of a LAN IP?
5. Are you trying to use existing-session across WSL2 and Windows instead of raw remote CDP?

Verify the Windows Chrome endpoint locally first, verify the same endpoint from WSL2 second, and only then debug OpenClaw config or Control UI auth.

Related

• Browser
• Browser login
• Browser Linux troubleshooting